Categories
degree show projects

STANCE 22

Welcome to the 2022 graduating season of Vehicle Design projects from Lahti Institute of Design in Finland. Here are some brief details about each student project. This year was a quiet one, I’m sure none of you on planet earth will forget the years between 2019 and 2022… and we definitely saw a knock-on effect from that situation. A really difficult time for all of us, and here are LAB University we are also seeing the results of reintegrating our Vehicle Design specification into our regular and highly regarded Industrial Design course. For example, there was a superb Electric Mountain/Urban bike project presented this year- by Riku Kinnunen who was officially part of Industrial Design studies. In future- students at our Institute will be fully integrated as one group- all aiming to be the best hardware/mobility/material object designers in the world – as always!

Enjoy the projects. Descriptions by the students:

eTrip Urban Bike by Riku Kinnunen
Try the QR code- and you can see the bike in your own home/environment!

STANCE Award Winner 2022: eHGV by Niko Pekkarinen

Concept semi-truck for the year 2030.

The goal of this graduation project was to design a concept of a semi-truck, for the year 2030, that utilises an alternative source of power. This project compared two of the most promising substitutes of fossil fuels and also sought to find solutions in the selected power sources problem areas. As a result of the design process, a 3D-model of a semi-truck was created.

STANCE22 Award Winner

The Last Mile – by Eveangerlien Blears

Folding e-Motorbike concept.

Extend your adventure. The last mile starts here.

Automated Parking Robot by Kim Tapio

Automated Parking Robot concept.

The project’s goal was to develop service idea for automated parking in the form of a parking robot for 2030. The assignment also included searching for and identifying current parking-related issues. Artificial intelligence and robotics are also explored for their possibilities.

Environmentally friendly and ethical materials in vehicle design by Mette Stubb

This graduation project discusses materials used in vehicle
interiors from an environmental and ethical perspective. Currently, fully renewable, and ethical materials are limited to concept vehicles. The aim is to explore what alternatives exist and how to make the consumer more aware of them. The project also explores the production methods, lifetime, drawbacks, costs, properties of different materials and how they could be used in vehicle interior design.
The goal is to create a public discussion on the use of environmentally friendly and ethical materials in vehicle interiors today and in the future. As different types of plastics are the most used material in vehicle interior design, which is of concern as the climate crisis progresses, it is important to identify renewable and ethical materials that could be used in the future for vehicle interior design. From an ethical point of view, the use of leather in vehicles is particularly questionable, as the production of leather produces huge carbon emissions, not forgetting the rights of animals. The demand for leather is constantly increasing and it is therefore important to find alternatives, such as artificial leather made from mycelium, mushrooms, and pineapple leaves. From an environmental point of view, materials should be as recyclable, biodegradable and carbon neutral as possible.

eMAD

Special thanks go to Peter Beliaev and Mariia Kozlova for creation of this promotional video. Thanks also to Lauri Haiko and our friends at LUT University for the amazing work on eMAD technology. This is a world leading electric motor cooling technology that all of us in vehicle design wanted to incorporate into our projects, and so should you! Get in touch with Lauri if you are interested- but here’s a showcase video to promote the tech, modelled and rendered by Peter. Just one of the services that our in house design studio Muotola, can offer external, or in this case internal clients.

Promo video for eMAD motor technology- with patented direct water cooling. Video created by Peter Beliaev (of Lahti Institute of Design) and directed by Mariia Kozlova. With special thanks to Janne Mustonen.

One final thank you to Eeli Ravea, who’s work you can also see in STANCE21 blog post- but this year he contributed an excellent project – once again intended to promote the eMAD motor technology from our partners at LUT University. This unofficial SISU branded 4×4 ULTIMATE Utility Vehicle (UUV) Concept began as a design brief to make use of the extreme torque characteristics of the patented eMAD motor system. The design brief also called on students to showcase the best of Finnish design and technology. All aspects of this project were conceived to be designed, and manufactured right here in Finland. eMAD motors were designed and engineered 100% at LUT University here, and that inspired us to take the Finnish theme as far as we could to feasible locally produced vehicle ideas. This is just one of the projects. The classic and dependable utility and military vehicle brand of SISU was chosen by Eeli to represent this design brief.

Categories
degree show events

STANCE20

STANCE 2020

June 2020​ – This year we celebrated the graduation of students that started their studies in the autumn of 2016. Because of the global COVID-19 pandemic the Institute of Design Degree Show could be organised this time only on social media platforms. The Institute of Design Degree Show was titled SPECTRUM. The STANCE20 show was held side-by-side with the MI Degree Show on STANCE social media channels.

All graduating students of 2020 were invited to display their graduation projects on the virtual STANCE2020 show. The show drew some valuable attention, although without an actual exhibition display, reaching a local audience turned out more difficult than usual. Some of the Vehicle Design projects were on display at the MI Degree Show, but the STANCE2020 show exhibited a total of 9 different vehicle design graduation projects. We were proud to show a large variety on the graduation projects; from entry-level super cars and specialised vehicles to production-ready trailers and service design concepts. These are the projects in our student’s own words.

Matias Pekkonen

KORG MEW/40

KORG MEW/40 is a shared mobile workspace for electronic music. It provides tools for extensive music and sound creation as well as sharing and streaming. The vehicle is targeted at a niche demographics of professional and amateur musicians.

MEW/40 uses visionary technology such as haptic hologram touch-control and a generative music tool. The concept emphasizes KORG’s impact on sound technology over the last 40 years and envisions the brand’s future identity, while assessing the possibility of a vehicle concept.

Antti Tirri

Yoga Balasana

Yoga Balasana is a vehicle concept for a city in 2040. This project goes through current and upcoming trends in our society. The concept is visually based on slow living and yoga. The final product is a 3D model and renders of an autonomous vehicle, where one can practise yoga inside.

Jarkko Salonen

Polestar Prebike

Polestar Prebike is an all-electric motorcycle concept for the year 2025. The electric car manufacturer Polestar was chosen as the brand for the project. Polestar is a pioneer in technology and sustainability in its field.

In this scenario, Polestar wants to expand into the motorcycle market by creating new innovative solutions and developing already existing technology into a smaller and more efficient form. In the project, I study how Polestar’s values, technology and new design language can be brought to motorcycles.

Julius Ranta

2030 MITSUBISHI Urban EV Concept

2030 Mitsubishi Urban EV Concept is an urban car concept for the year 2030. The concept car shows what a small urban vehicle could look like in the future and what new possibilities future technologies bring.

Mitsubishi Urban EV Concept is a four-seater electric vehicle powered by two electric hub motors inside the rear wheels. The hub motors free up space from the front which gives more space for the interior. The objective was to have as large an interior as possible in the smallest exterior dimensions.

The design of Mitsubishi Urban EV Concept emphasises functionality and user-friendliness. It prioritises interior space and comfort, which is made possible by an intelligent layout, large smart window surfaces and a partial autonomous driving system. The concept has an advanced driving assist system for driving in urban streets, and on rural roads it can drive completely autonomously. The steering wheel can be folded behind the dashboard and the front seats can be rotated 180 degrees when the vehicle is driving autonomously. The large smart windows can display information for the passengers as well as change the tint and cloudiness of its surface. During parking, the windows can be made opaque to block the visibility inside the vehicle.

Tuomas Tolonen

DÆRK DRAGON

The task of DÆRK DRAGON project was to design an autonomous luxury vehicle for the Chinese market. The goal was to create a symphony of new technology in a luxurious environment. It includes new features such as hybrid hydrogen fuel cell drivetrain and hologram & gesture control. As a result of this project, a 3D model was made.

Matias Laaksonen

Lunaliner Concept Car 2030

I did my Graduation Project for Oy Lunawood Ltd which is a global marketing leader in Thermowood manufacturing. In this project I studied the suitability of Lunawood materials for a car and especially for its interior while implementing the best possible concept car to market Lunawood’s products.

The concept car to be implemented is set for 2030 when increased population growth will significantly increase traffic jams. At the same time, the concept is a solution for replacing time lost in traffic jams and utilize it with the benefits of the concept car. In this project, I testified that making a car is more environmentally friendly with the help of right materials and design.

Nicklas Sundvall

Weckmann WS90M

In this graduation project I deal with the re-design of Weckman Steel Oy’s M-model series WS90M trailer. The purpose was to improve the overall appearance of the trailer by visually modernizing the look with new components, colors and graphics. In addition to the above, the trailer should be kept as cost-effective and easy to manufacture as possible, in order to be competitive in price. As a result, a 3D model was made that can be used to make a prototype of a trailer.

Jaakko Järvinen

GACHA Robot Bus Service Design Concept

The main goal of this thesis was to produce a service design concept for Sensible 4 and Nokia to visualize scenarios that the GACHA robot bus could face in the area of Karamalmi Espoo. The scenarios were dedicated evenly between Sensible 4 and Nokia.

Esa Mustonen

RAW by Koeniggsegg

RAW by Koenigsegg is a digital concept car created by Esa Mustonen for RAW Design House as his Graduation Thesis. The work was carried out under supervision and support of Christian von Koenigsegg and Sasha Selipanov. The concept car envisions a futuristic entry-level hyper car under an imagined “RAW by Koenigsegg” sub-brand.

RAW by Koenigsegg makes use of the world famous Koenigsegg technologies and know-hows. Mounted behind the innovative 3 seat carbon fiber occupant cell is the 3 cylinder Freevalve TFG engine which was first shown to the world in the Koenigsegg Gemera. Our ambition was to use Koenigsegg Automotive’s vast composite and light-weighting experience to aim for an unprecedented 700hp and 700kg, a new interpretation for the 1:1 power to weight ratio. On top of this, RAW by Koenigsegg has a strong focus on innovative aerodynamics with its flow-through architecture and jet fighter afterburner inspired articulated rear diffuser.

RAW by Koenigsegg offers a new type of user experience as it can be used in both the real and the virtual world. The car allows its user an opportunity to experience its performance and influence its setup in either real life or digital states using already existing highly correlative racing simulators.

RAW by Koenigsegg is an exciting vision of what a light weight entry-level hyper car of the future could look like.

The 2020 Stance Award is awarded to Esa Mustonen for his outstanding entry-level super car project at Koenigsegg.

Categories
degree show

STANCE19

May 2019. The Institute of Design held a degree show again. Reminiscent of previous joint exhibitions, not held since 2016, this show was conceptually a rebirth (too many rumours of our untimely death). The title was REBUILT.

All graduating students of 2019 were invited to display their final design projects – and the location was our new campus at ISKU. We wanted to attract visitors curious about our new place, and we wanted to show our own friends that we share this new joint campus with, just what we do in the Design Institute. STANCE19 was integrated with this main exhibition. The event was curated and designed by a large team of talented staff and students. Vehicle Design graduates exhibited 7 graduation projects and one very special production vehicle. Let us start by explaining that one in the words of RMK themselves!

RMK E2

On 1st of February 2019, RMK Vehicle Corporation unveiled their first electric motorcycle, the RMK E2 at the MP19 Motorcycle Show in Helsinki, Finland. The E2 will be manufactured in Finland and production is slated to begin in late 2019.

The E2 packs a punch. 50 kW of power and an instant torque of 320 Nm will guarantee great performance with a limited top speed of 160 km/h. The unconventional motor setup offers a smaller rotational mass and unsprung weight that is comparable to traditional motor setups. The battery gives a range of 200 – 300 km depending on driving style.

You can pre-order your E2 now.

The RMK E2 was designed by RMK with the help of our student Miikka Salovaara. Miikka contributed concept sketches and graphic design, working closely with the small RMK design team to create this bike. RMK are a lean start-up company so all hands were needed to create this radical design. The engineering of the hubless rear wheel and motor is particularly unique. We were very happy that RMK agree to display the bike for a few days at our STANCE/Rebuilt exhibition at Lahti University of Applied Sciences. It is very imposing in the metal.

Aukusti Mokkala

Vision for 2050 Megacity Law Enforcement

This is a VTOL -aircraft designed for rapid deployment of up to four Law Enforcement officers. It takes the manoeuvrability of a helicopter and com­bines it with the structure of a car. The compact design allows it to manoeu­vre and land in within the narrowest spaces of a megacity. It features twin rotors for vertical lift and two auxiliary rotors for thrust, as well as a wide variety of short to long range -sensors for monitoring its surroundings. The bright colours ensure visibility and bolster a strong but friendly presence. My goal was to create a unique, yet believable design that is suitable for movies and games.

Atte Nurminen

Lamborghini Raton, Autonomous Supercar

Lamborghini Raton is an autonomous supercar for the future, featuring advantages of next generation automotive technologies. The goal is to replace the pleasure of driving by new kind of user experience. The low sitting position at the front brings a sense of speed.

The in-turned wheels create a new kind of connection between user and machine. Raton is designed to look like a true Lamborghini with the classic design features of their supercars.

Jukka Ossi

The next D-segment SEAT passenger car

The Spanish car brand SEAT does not currently have a passenger car model in the D-segment. The goal of the graduation work was to design a proposal for a car of that segment based on the research work done. The D-segment includes car models such as: Volkswagen Passat, Opel Insignia and Volvo V60.

Kristian Talvitie

Bugatti AOS

Our world is faster and more connected than ever. The line between the real world and virtual is thinner than ever. This

world has many changing effects on human life and thinking. From an evolutionary perspective point we are at the beginning of drastic change. In this work my intention is to study what kind of experience the future customer of Bugatti needs and to develop concept based on that.

Iiro Laine and Antti Paakari

Northern Multifunction Vehicle

In this graduation project we designed fully electric multifunctional vehicle for Northern environment. In this project we discuss about Northern circumstances and its challenges for vehicles. Our vehicle is designed around electric powertrain and adaptability for weather conditions and needs of the user. In our design process we discuss ideation, sketching by drawing, clay modelling, 3D-scanning and 3D-modeling.

Samuli Maliniemi

Keletric – Design research for Finnish small electric motorcycle.

In my Bachelor’s Thesis I have designed a houseboat for private use. It is suitable for year-round living in Finland’s varied weather conditions. The houseboat strives to solve the challenges of urban living in the future. Urbanization and rising sea levels resulting from climate change can affect the emergence of new forms of living in Finland as well as in the rest of the world. The houseboat I have designed is environmentally friendly and it is also suitable for going at the high seas.

Janne Mustonen

Piaggio P107

As a graduation project I researched the near future of aviation and created a flying boat concept. This project does not reshape the aviation infrastructure but helps to understand it and its challenges. A result is a realistic concept that offers private transportation to remote locations in and outside of the infrastructure.

2019 Stance Award winner was announced later that week, at the Ace Corner venue. We really like our friends at Ace Corner and once again we met for an informal beer & burger chat with our outgoing students. That sunny evening the award for best project was presented to Janne Mustonen for his outstanding work on an electric aircraft project. Janne has a deep passion for aviation, and this project was a true labour of love for him- and the result was quite spectacular and unique.

Official website for 2019 Degree Show

Categories
degree show events news projects

STANCE18

A few weeks ago STANCE18 happened. This blog post is running late, thanks to our exciting process of moving our entire Design Institute to a new campus facility! More news on this soon, but by coincidence we are moving to become very close neighbours of Ace Corner and the Motorcycle Museum. This was again our chosen venue for STANCE18 and once we are based nearby perhaps we will be more frequent visitors? Ace Corner is a friendly place that always makes us feel welcome. This year our exhibition was quite small – more projects will actually be unveiled later this year – but we had awesome Ace Burgers and a few beers and celebrated another group of talented Finnish designers leaving us for the wider world!

The weather this May was truly exceptional. The hottest for 30 years in Finland and we enjoyed the evening looking out across the vast lake we have here in Lahti. STANCE is about networking, it is about making sure that students, alumni, staff, businesses or anyone in Finland interested in transportation and vehicle design can get together socially. I will waste no more blog space and will let our students explain their own graduation projects (useful to have abstracts written in English), and you can see there were one or two other interesting things we exhibited. Finally we brought back our Suzuki 750cc motorbike that the museum had donated to us! Our students had transformed it into a Cafe Racer.

We also partnered with our usual sponsors Rightware (of Kanzi UI software fame), plus a newcomer called AirShaper! Rightware helped us present our annual STANCE Award- given for our favourite project of the exhibition. There have only been 4 winners of STANCE awards previously, and 2 of those are working in OEM vehicle design studios right now! In 2016 we also awarded a special online version, just that once. This year a project stood out at the show- for exhibiting a 1:5 scale clay model. Ivo Mukkulainen received the 2018 Rightware STANCE Award for his tireless dedication to creating a beautiful Jaguar branded design. His reward this year, was a 4 month internship at Rightware design office in Helsinki. We wish him the best of luck with his career. An exciting part of Ivo’s project was aerodynamic testing of his model, in a wind tunnel. How did we achieve this? Well it wasn’t a real wind tunnel, just a digital simulation thanks to a new online service created by AirShaper.com. A special offer of €500 simulation time (using their digital wind tunnel costs less than a real one!) was created just for us at STANCE, and you simply have to follow this link and sign up to their newsletter (it’ll cost you your email address) and they could pick you to receive the €500! This offer is only for STANCE followers, and your chances are VERY high!

Ivo can explain his project topic himself:

Ivo Mukkulainen

 

Jaguar SVO Project 9 – Future Classic

The subject is a classic car of the future.

I want to show how driver’s passion can continue in the future, considering future technology and standards.

New possibility to drive on the race track and not to be scared about consequences.

How Jaguar heritage and design DNA will continue in the future.

Heidi Yli-Suvanto

 

The North Face Exploration Vehicle

 

This graduation project is a conceptual exploration vehicle that is branded for The North Face and is suitable for both urban and natural environments. A major goal of this project is to encourage peo­ple who have spent most of their lives in the city to explore and feel comfortable going to areas outside of the urban environment. The inspiration, and overarching goal of this project, is to facilitate eye-opening experiences in nature and inspire people to take better care of their surroundings.

 

Mika Niskavaara

 

KTM 360 Electric Motorcycle Concept

 

My graduation project is an electric motorcycle concept for freeriding and exploring urban environments. With this concept l’m going to explore solutions and possibilities for urban freeriding. l’m aiming to introduce new ideas to the motorcycle industry inspired by bmx and freestyle mountain biking.

 

Mikke Leinonen

 

Nissan Kirei – Future Classic

 

My final project is the future classic vehicle concept. The car is designed for the year 2025 and vehicle should win the Concours d’Elegance competition in 2050.

The main focus of the project concentrates on the exterior design of the vehicle.The car should stand out from the mass and awaken great emotions.The car has to be futuristic and there should be elements that make it a classic in the future. I have chosen Nissan for the brand, because I’m not so familiar with Nissan. I also wanted to choose a brand that does not have a classic car so far. The purpose of my project is to be a Vanguard for the Nissan and help the brand to create a classic car in the future.

I’ve tried to find elements and issues for the project that make products classic and iconic. The written part of the thesis consists of the steps of the project’s progress, brand history and Concours d’Elegance competition.

 

Peppi-Emilia Salmi

 

Trimoto – Endurance Motorcycle Trailer

 

The thesis focuses on designing a motorcycle transport trailer. With the market research, I strive to create a potential and useful concept for the market.

The result should be an affordable, lightweight and functional entity for fluctuations a Finnish weather conditions. The trailer should be able to carry two or three full size enduro motorcycles and their drivers’ accessories.

The thesis is perceived with a 3D model made by the Autodesk Fusion 360 modeling program and the physical 1:6 model.

Perttu Susi

 

Hukka Houseboat

 

In my Bachelor’s Thesis I have designed a houseboat for private use. It is suitable for year-round living in Finland’s varied weather conditions. The houseboat strives to solve the challenges of urban living in the future. Urbanization and rising sea levels resulting from climate change can affect the emergence of new forms of living in Finland as well as in the rest of the world. The houseboat I have designed is environmentally friendly and it is also suitable for going at the high seas.

 

Tatu Konttinen

 

Vator 27DC – Reviving a Finnish Boat Brand

 

The subject of this thesis is a study and a concept of reviving Vator boats with a new model and development of a businessmodel. Vator is a dead brand which used to be one of the biggest boat companies in Finland.

The procecution of the idea required research about contemporary boating and how it should evolve in the future.

The idea of owning things is changing and since boating is concidered as an expencive hobby there is no doubt that it wont affect the boating culture aswell. Major part of the process is to focus on customer needs and demands in the near future without forgetting a boat that suits multiple purposes.

Teemu Paavola

 

Mega Yacht Concept for 2040

 

This thesis is about future possibilities of yachting and new younger generation users.

Focus on this thesis is on future technologies and younger users. What is possible in the future and what do the younger generation want from their yachts. A fictional user has been created for this thesis to get more realistic end result. User is based on a future research. The design of this yacht came from the futures pos­sibilities and functions that user needs. There is no companies or any other contractors.

Thesis is fully based on a research and fictional user needs. Design is created based on research and sketching all the way to the final 3d model.

 

 

Click the image to go sign up!

 

SaveSave

Categories
news Russian design

2017 the London and Russian connection.

2017 was an interesting year for us at STANCE. Many of our students are out there in the wide world, making their way in further design studies and we have even reached the point where some are graduating at a Masters level. In January our lecturer caught up with our student at the RCA in London, and we were very pleased to see two more of our graduates succeed him on the course.

Thanks to some issues with a passport- our travelling to see friends in Russia was somewhat limited. Despite this- our lecturer Lee Walton managed to gain an award. Our students participated in a short design competition, for the PUSHKA Design Forum in Moscow. Their brief was to design an automated delivery vehicle for the TRAFT brand.

3rd year student Iiro Laine placed 2nd overall in the PUSHKA Design Forum design competition, and was awarded a certificate and prize by the Traft company. Iiro’s innovative but simple concept, proposed re-using existing transportation trailers with modern self-driving tractor units.
Highlights of 2017  (our annual graduation show STANCE18 will be happening 25th of May in Lahti, watch this space!)
  • Kalle Keituri, our alumni of 2015 graduated from RCA London, then began his professional career as a designer at Rolls-Royce Motor cars in the UK.
  • Henri Hokkanen our alumni of 2016, began his professional career as a Designer at Valtra Inc, Jyväskylä.
  • Antti Vahtola, our alumni of 2017 began his Masters studies at Umea Institute and this year placed 2nd in the BRP Student Design competition, titled Urban Arctic Mobility.
  • Hilja-Maria Kaitila, and Olli Seppällä both began their Masters at the RCA.
  • Mikael Serjala and Mika Karjalainen began Masters studies at SPD in Milan.
Categories
collaboration projects

eGroovy project

Instead of the usual STANCE blog post- this post has been written by a guest team of graduate designers. They call themselves Team Groovy, after the project they created together. I will let them explain:

Team Groovy


The “eGroovy project” started July 17th. There had been some negotiations and planning about developing the bigger Groovy caravan further (presented at Caravan 2016 fair a year before), but due to time constraints we decided to ditch that plan. The bigger Groovy was already presented as a design concept, so the next logical step would have required some help from engineers. And currently our team was formed by three design graduates and former class mates, including me, Mikael Kosonen and Waltter Holm. All we needed was a space to work in and some tools and materials. Nothing really fancy, but as a starting designer, you have to make do with what’s given to you.

 
The Caravan 2017 fair was less than two months away. The initial plan was to go there and present our concept to the big audience. However, as our project began there wasn’t any specific brief. Our client Tom Sågbom told us he’d been thinking about “ultra light caravan available for everyone to buy”. Together with him we made some quick research about existing products to match that description, and the idea of a bike camper was born. E-bikes are growing in numbers as the technology becomes cheaper, so during the first week our brief was formed. The goal was to design a bike camper, or to be more precise, a “sleeping pod” to be towed with e-bike. The Finnish law defined most of the features: it had to weigh less than 45 kg’s and width shouldn’t be more than 120 cm’s. At that point we decided it was going to be for one person only.
 
Before sketching we started to think about ergonomics. We took out a measuring tape, made Waltter lay down on the floor and took notes what dimensions were required for a person taller than average. That way the space inside the camper would be adequate for anyone. Then the sketching began – we gave ourselves five days to nail down the overall shape. It was really challenging to try to think about a product that hadn’t been done before. No existing products to take references from, aside from actual caravans. But that was not an option, as we wanted to avoid making it look like a shrunken caravan. Dethleffs had made a bike camper concept in 2010, but it was never taken into production. No wonder, as it was huge and clumsy, weighing 180 kg’s. Imagine towing that with your muscles only…
 
Then an idea came into my mind: a solid object that was surrounded by an outer “shell”. The key sketch was born. We agreed that the idea was worthy of further development, and we sketched some more, this time in 1:10 scale with the actual dimensions. To keep the camper compact and easily towable, the idea of expanding space for the legs came into Mikael’s mind. Waltter made the first mock-ups from cardboard and styrofoam. Time flew, and 24th of July we started to prepare to build the model. Our original plan was to make eGroovy a working 1:1 prototype, but it was too much of a challenge. Making an actual product in less than two months would’ve been incredible achievement, but the risk of a failure was too big. Tom was our client, so we had to make sure to produce everything he asked. Refined scale model is better than rushed and unfinished prototype. So we messed around for a week, and made the decision to build 1:2 scale model instead.
 
August was mainly about building the model while defining the design. Details were formed as the model was built. The interior was on purpose left pretty blank, because time was running out. We focused on the exterior and used our background as automotive design graduates to our aid. Tom liked what he was seeing and gave us pretty much free hands regarding the design. Only one restriction: it shouldn’t look and feel like a coffin! September was drawing close and so was our deadline. Come to think of it, had we decided to build a prototype in real scale, we would’ve probably failed (and say goodbye to our career). After all, the reservations for the stand at the fair was already made, so failure was not an option. On the 6th of September, I started to work with digital material. My area of responsibility was to make renderings to showcase the design and make the layout for the posters, while Mikael and Waltter built the model. The absolute deadline for digital work and poster design was 11th of September, because we had to take into account the time required for printing.
 
Thursday 14th of September, a day before the Caravan 2017 fair, and we still didn’t have the posters. I called Grano, and to our fortune, everything was ready. No idea why they didn’t inform  me… but off we went, to build our stand for the show. The weekend was pretty hectic, and we were astounded how much interest our concept drew. Some of the visitors said that they had come to see specifically our concept. Tom was pleased as well, so the goal was reached: our client was happy and felt he got what he asked for! 
 
We think that the highlight of the fair was Saturday: we took to the stage and presented eGroovy to a big audience. Roope Salminen was interviewing us, and we got to answer questions regarding the design and our education. The interview and the following presentation was a total surprise for us, but even so it went really well. We also got some media coverage, which is extremely important for our future career. We think that the eGroovy project is a manifestation of determination that is required in this business: after the Caravan 2016, we had underwent negotiations with Tom for nearly a year about some additional project, this time with some money involved. eGroovy was our first job as professional vehicle designers, and we couldn’t be happier of the end result. There has already been some talk about finding the possible manufacturer, but nothing more can’t be said at this point. Maybe eGroovy will remain only as a design concept, or maybe you will see them roaming the streets in the future. Either way, I’m sure eGroovy will help us to move forward in our careers.

Team Groovy are Henri Helvilä (text) Walter Holm and Michael Kosonen.

Press coverage: https://www.moottori.fi/ajoneuvot/jutut/caravan-2017-kaynnistyi-tassa-16-vinkkia-nayttelyyn/

 

 

 

 

SaveSave

Categories
degree show news

STANCE17

2017 marks our third ever graduation year, and our graduates displayed wide-ranging vehicle proposals based on their own independent research and collaboration with industry clients. We still like to use our unofficial name and brand STANCE here at Finland’s first and only full-time Vehicle Design study programme. This year we wanted to emphasise that we are from Lahti (not Helsinki!) and that we are based in the small but world famous Lahti Institute of Design. Lahti is something of a motor-city in Finland, with a strong automotive culture. There’s also a bus factory based here. That particular place was part of a project to design and build Saunabussi (yes, a bus with a sauna inside) which two of our students were involved with. We were very grateful to have Saunabussi visiting our STANCE17 event! Interestingly, the first franchise of London’s Ace Corner Cafe is right here in Lahti Finland. We teamed up with Ace Corner Finland to host our degree show. Ace Corner is also the location for Finland’s largest motorcycle museum. Our event gave VIP visitors access to the motorcycle museum for free- and we thank the owners of Ace Cafe for that privilege. On the evening of 24th we presented our STANCE award, sponsored by our good friends at Rightware (one of Finland’s top vehicle industry partners). The award for best project this year, was given to Ilja Oikarinen for his innovative plastic concept vehicle. The Pod-Vehicle concept is an autonomous vehicle that owners can sleep inside- and can be owned, or even rented like a Japanese pod-hotel – for mega-city workers to sleep near their place of work. Other commendable projects included Waltter Holm’s Patria armoured vehicle concept. A very comprehensive and detailed design project, with the most accurate and detailed model we have ever seen at our institute. Two students, Antti Vahtola and Antti Alasalmi, returned just in time from Turin Italy, where they had been working at the Changan Automotive Europe design studio. They completed the Chagan Serenity visual identity concept thesis work at that studio. This type of collaboration with industry is a vital part of our learning process and we are incredibly grateful to Changan Automotive for all their help. We would like to thank Patria, Covestro, Lada Moscow, Changan Automotive, Rightware and of course Ace Corner for all their help contributing to this years successful projects and exhibition.

Mikael Kosonen

 

Police Multi Terrain Vehicle

The subject of this graduation project is to create a concept for a new kind of police vehicle for finding missing people in off-road environments. This thesis examines missing person search operations and associated problems and tries to find answers to these questions. At this moment a searching process is usually too complicated and public authorities don`t have any vehicles made for this use. Also the resources are limited, because effective search operations need so many people to join them.

Police Multi-Terrain Vehicle

Henri Helvilä

 

ORCA

This graduation project is about designing a marine rescue vehicle. I try to find the issues surrounding current rescue vehicles and concentrated on finding solutions to the problems that complicate the operations of the current rescue boats. The final product is purely conceptual vehicle and also my vision of the ideal small marine rescue vehicle. The vehicle is operated by one person, and it’s capable of transporting another person along with the driver.

ORCA Marine Rescue Vehicle

 

Joonas Peitsara

 

Militia Phantom

This thesis and the visual aspect of the project focused on the walking combat vehicles of Titanfall. These vehicles are called Titans.

The goal of this project was to design a new type of Titan for the Frontier Militia unit that is in the science-fiction universe of Titanfall.

The design process of this project includes a wide range of fine detailed digital and traditional drawings.

The end result is a super heavy stealth camouflaged assault and ambush Titan, Phantom

Teppo Antolla

 

Sampo from Kalevala

My thesis project was to focus on the world of Kalevala and bring the mythical machine named Sampo into today’s world in the form of a motorcycle. For those who don’t know, Sampo is a magical device of indeterminate form. It has been proposed to be knowledge, power, skill as well as material things, such as a magical mill, a counterfeit device, and a machine for minting coins.

My aim was to build a rugged machine, visiting the past and picking up key elements from days gone by. My project features a hardtail frame to make it low and to keep a retro feel to it. For example, Harley-Davidson fat boy wheels are used, because they give an impression of historic style, when wheels were riveted by blacksmiths. In Kalevala, Blacksmith Ilmarinen forged the Sampo.

Sampo Motocycle

Waltter Holm

 

ARCTOS

The aim of the bachelor’s thesis was to design an innovative armoured personnel carrier. This bachelor’s thesis is made in cooperation with Patria Land Systems. An armoured personnel carrier is an armoured vehicle which run on tracks, in which the crew can be transported. My Bachelor’s thesis presents a novel solution to armoured personnel carriers which can easily be adapted to other purposes. Purpose is possible by switching the integrated function module into the another function module. Function module options may include the evacuation, reconnaissance, maintenance and in-service module. Armoured personnel carrier is completely unarmed.

ARCTOS

Hilja Kaitila

 

Algorithms as designers

The topic of this graduation project is to create a design process that benefits from computing science by using algorithms and artificial intelligence as part of the process. The focus is on how designers can exploit existing programs that have a large volume of users (big data) and how research results can be applied to Lada’s renewed brand image.

Antti Vahtola and Antti Alasalmi

 

Changan Serenity

This graduation project was created for Chinese car manufacturer Changan. The brief was to create a visual identity for the brand and to form the key elements of their design. Our mission was to build a vision which presents Changan’s identity, giving the guidelines for the global design language. Our concept is built around safety and clarity. Changan means “lasting safety” as a name, so the story for the vehicle reflects the brand. The main theme of the concept was the interaction with water, having strong inspiration from a boating world combined with a Scandinavian touch. The vehicle is designed for the autonomous era. The user experience will be highlighted when there’s no need to drive.

Ilja Oikarinen

 

Pod-car Concept

My graduation project was created with the collaboration of Covestro, a company that produces plastics. This project is aimed at finding a way to merchandise Covestro’s materials in a new and exciting way. To do that I have chosen a future scenario which will address the issue of high density of people and unavailability of housing.

To solve these problems, I have created a vehicle interior concept which will provocatively highlight a solution and proposal for the year 2030. In this concept the interior is used like a Swiss army knife. It is multipurpose, where you can sleep, rest, hang out or drive the vehicle, depending on your need. The car can be rented or bought.

http://www.ace-corner-finland.fi
http://www.moottoripyoramuseo.fi

Categories
degree show events projects

STANCE17 public vote

24th of May 2017 saw the opening of our STANCE 17 degree show. We would like all of you to take part in choosing a “people’s favourite” from our exhibits. So here are all 8 projects that were on display. Take a look through the images, then use the comments to vote. Or head to our Facebook page, or twitter!

Categories
collaboration projects Russian design

LADA 2050

Lada 2050 Future Vision: The story began in 2016 when our friends in Moscow suggested an ambitious project idea. We cautiously agreed to attempt a project to collaborate with 2 other schools, and one very large car company. The project was for Lada Moscow, and eventually things were set in motion when 12 of our students travelled to Moscow to take part in a 1 week workshop. Our generous hosts at Moscow Polytechnic looked after us handsomely, and that week was the beginning of a 3 month project coordinated between Moscow Polytechnic, Steiglitz Academy of St. Petersburg, and Lahti Institute of Design. Lada Moscow chief designer Raphael Linari mentored the students on this project, with close guidance and feedback every step of the way. We are all extremely grateful to his input. 36 students took part and worked as 6 teams of 6. Each team had 2 members from each school, to ensure cross collaboration. After the 1 week intensive workshops, development of vehicle concepts continued within each group- but with internal competition driving the projects. Students regularly pitched their projects to Raphael Linari, who was instrumental in his feedback, along with staff of all institutes guiding students. On our side, students were helped greatly by Tapani Jokinen with the strategic design and future scenario aspects of this project, and we thank him for that. 2050 is far in the future, and Lada as a business were interested in true blue-sky thinking. The competition was narrowed down to 9 designs (from 36) but eventually only one was chosen to be produced and developed fully. The project continued in 2017 in Moscow, with a specially selected team working to finish the final design. That team worked to create a scale model for the Moscow biennale Design exhibition, in April 2017. This video shows the final result of the project, and I have included a gallery of some of our activities in Moscow.

There is a lot more info on various aspects of this project, at Cardesign.ru. Follow the link!

Categories
events projects

Boris Fabris – Automotive Design Workshop

We at STANCE have had a very eventful term this autumn, and we have a few interesting projects, topics, and events to report. The first we want to talk about is a unique and outstanding opportunity we had this year to employ the services of Italian designer Mr Boris Fabris. In addition to being an extremely nice man, Boris Fabris is a very experienced car
designer- with many production projects to his name. Born in 1972, in Rome Italy, Boris has been working in Turin for nearly 20years and most of those years he has worked at the legendary design studio of Leonardo Fioravanti. One of Bori’s most prominent vehicle designs, was the very first Special Projects Ferrari- the SP1. This unique Ferrari was created
in 2008 for a wealthy Japanese collector.

photo credit: Boris Fabris

As you can imagine, the chance to have a Ferrari designer visit us, with deep industry experience to pass onto our students- was a chance we did not want to miss. Mr Fabris offered to hold a one week design workshop, to impart as much of his knowledge and guidance as he could in a visit that proved to be too short (because we enjoyed his company so much). So in September, the Automotive Design Workshop was launched, and students from across our year groups were invited to take part. In total 22 students (the maximum capacity!) were enrolled, and the intense course began on 5th of September with Boris introducing himself to all of our students. After some fascinating insight into the design process, and also some glimpses of his own work, students were all excited and enthused to begin. Boris gave students 2 different design projects within one week. The work was intense and satisfying, with results being demanded so quickly. Boris expertly guided the students to produce ideas and think through the design problems of creating a vehicle as quickly as possible. Enthusiasm was high, and Boris had even carried his own personal car design library with him (some very heavy books to bring from Turin to Finland!). The history of Italian car design, and also the specific experience of bringing a design from sketch to being stamped out in a factory was something we hoped Boris would bring to us, and he delivered these things superbly. Students worked through one brief- for a contemporary luxury coupe- then later in the week Boris used his expertise to place the students into groups
that we knew would simulate a typical design team experience. Those groups set to
work designing a future mega-city urban vehicle design. Group work (once it got underway with the second design brief) was strongly emphasised by Boris, as was team leadership, decision making under pressure and many other real-world, real pressure automotive design industry practises. Our students felt that they gained huge experience in just a matter of days.

The group projects were presented at the end of the week, at the Oy Oy art gallery in Lahti, where we decided to show all of the project work along with other vehicle design artworks by our students (see separate blog post). The two events fitted together nicely, and Boris was happy to publicly show some of his own skills by sketching at the gallery! The intensity of the course and the hard work encouraged by Boris, was only possible thanks to his friendly and warm personality. We will always be grateful to him for visiting, and we would also like to thank the City Council of Lahti for funding of his visit (thanks to our award prize money of 2015).

A gallery of Boris and students at work follows below.