Categories
degree show

STANCE19

May 2019. The Institute of Design held a degree show again. Reminiscent of previous joint exhibitions, not held since 2016, this show was conceptually a rebirth (too many rumours of our untimely death). The title was REBUILT.

All graduating students of 2019 were invited to display their final design projects – and the location was our new campus at ISKU. We wanted to attract visitors curious about our new place, and we wanted to show our own friends that we share this new joint campus with, just what we do in the Design Institute. STANCE19 was integrated with this main exhibition. The event was curated and designed by a large team of talented staff and students. Vehicle Design graduates exhibited 7 graduation projects and one very special production vehicle. Let us start by explaining that one in the words of RMK themselves!

RMK E2

On 1st of February 2019, RMK Vehicle Corporation unveiled their first electric motorcycle, the RMK E2 at the MP19 Motorcycle Show in Helsinki, Finland. The E2 will be manufactured in Finland and production is slated to begin in late 2019.

The E2 packs a punch. 50 kW of power and an instant torque of 320 Nm will guarantee great performance with a limited top speed of 160 km/h. The unconventional motor setup offers a smaller rotational mass and unsprung weight that is comparable to traditional motor setups. The battery gives a range of 200 – 300 km depending on driving style.

You can pre-order your E2 now.

The RMK E2 was designed by RMK with the help of our student Miikka Salovaara. Miikka contributed concept sketches and graphic design, working closely with the small RMK design team to create this bike. RMK are a lean start-up company so all hands were needed to create this radical design. The engineering of the hubless rear wheel and motor is particularly unique. We were very happy that RMK agree to display the bike for a few days at our STANCE/Rebuilt exhibition at Lahti University of Applied Sciences. It is very imposing in the metal.

Aukusti Mokkala

Vision for 2050 Megacity Law Enforcement

This is a VTOL -aircraft designed for rapid deployment of up to four Law Enforcement officers. It takes the manoeuvrability of a helicopter and com­bines it with the structure of a car. The compact design allows it to manoeu­vre and land in within the narrowest spaces of a megacity. It features twin rotors for vertical lift and two auxiliary rotors for thrust, as well as a wide variety of short to long range -sensors for monitoring its surroundings. The bright colours ensure visibility and bolster a strong but friendly presence. My goal was to create a unique, yet believable design that is suitable for movies and games.

Atte Nurminen

Lamborghini Raton, Autonomous Supercar

Lamborghini Raton is an autonomous supercar for the future, featuring advantages of next generation automotive technologies. The goal is to replace the pleasure of driving by new kind of user experience. The low sitting position at the front brings a sense of speed.

The in-turned wheels create a new kind of connection between user and machine. Raton is designed to look like a true Lamborghini with the classic design features of their supercars.

Jukka Ossi

The next D-segment SEAT passenger car

The Spanish car brand SEAT does not currently have a passenger car model in the D-segment. The goal of the graduation work was to design a proposal for a car of that segment based on the research work done. The D-segment includes car models such as: Volkswagen Passat, Opel Insignia and Volvo V60.

Kristian Talvitie

Bugatti AOS

Our world is faster and more connected than ever. The line between the real world and virtual is thinner than ever. This

world has many changing effects on human life and thinking. From an evolutionary perspective point we are at the beginning of drastic change. In this work my intention is to study what kind of experience the future customer of Bugatti needs and to develop concept based on that.

Iiro Laine and Antti Paakari

Northern Multifunction Vehicle

In this graduation project we designed fully electric multifunctional vehicle for Northern environment. In this project we discuss about Northern circumstances and its challenges for vehicles. Our vehicle is designed around electric powertrain and adaptability for weather conditions and needs of the user. In our design process we discuss ideation, sketching by drawing, clay modelling, 3D-scanning and 3D-modeling.

Samuli Maliniemi

Keletric – Design research for Finnish small electric motorcycle.

In my Bachelor’s Thesis I have designed a houseboat for private use. It is suitable for year-round living in Finland’s varied weather conditions. The houseboat strives to solve the challenges of urban living in the future. Urbanization and rising sea levels resulting from climate change can affect the emergence of new forms of living in Finland as well as in the rest of the world. The houseboat I have designed is environmentally friendly and it is also suitable for going at the high seas.

Janne Mustonen

Piaggio P107

As a graduation project I researched the near future of aviation and created a flying boat concept. This project does not reshape the aviation infrastructure but helps to understand it and its challenges. A result is a realistic concept that offers private transportation to remote locations in and outside of the infrastructure.

2019 Stance Award winner was announced later that week, at the Ace Corner venue. We really like our friends at Ace Corner and once again we met for an informal beer & burger chat with our outgoing students. That sunny evening the award for best project was presented to Janne Mustonen for his outstanding work on an electric aircraft project. Janne has a deep passion for aviation, and this project was a true labour of love for him- and the result was quite spectacular and unique.

http://www.muotoiluinstituutti.fi/degreeshow2019/
Official website for 2019 Degree Show

Categories
degree show events news projects

STANCE18

A few weeks ago STANCE18 happened. This blog post is running late, thanks to our exciting process of moving our entire Design Institute to a new campus facility! More news on this soon, but by coincidence we are moving to become very close neighbours of Ace Corner and the Motorcycle Museum. This was again our chosen venue for STANCE18 and once we are based nearby perhaps we will be more frequent visitors? Ace Corner is a friendly place that always makes us feel welcome. This year our exhibition was quite small – more projects will actually be unveiled later this year – but we had awesome Ace Burgers and a few beers and celebrated another group of talented Finnish designers leaving us for the wider world!

The weather this May was truly exceptional. The hottest for 30 years in Finland and we enjoyed the evening looking out across the vast lake we have here in Lahti. STANCE is about networking, it is about making sure that students, alumni, staff, businesses or anyone in Finland interested in transportation and vehicle design can get together socially. I will waste no more blog space and will let our students explain their own graduation projects (useful to have abstracts written in English), and you can see there were one or two other interesting things we exhibited. Finally we brought back our Suzuki 750cc motorbike that the museum had donated to us! Our students had transformed it into a Cafe Racer.

We also partnered with our usual sponsors Rightware (of Kanzi UI software fame), plus a newcomer called AirShaper! Rightware helped us present our annual STANCE Award- given for our favourite project of the exhibition. There have only been 4 winners of STANCE awards previously, and 2 of those are working in OEM vehicle design studios right now! In 2016 we also awarded a special online version, just that once. This year a project stood out at the show- for exhibiting a 1:5 scale clay model. Ivo Mukkulainen received the 2018 Rightware STANCE Award for his tireless dedication to creating a beautiful Jaguar branded design. His reward this year, was a 4 month internship at Rightware design office in Helsinki. We wish him the best of luck with his career. An exciting part of Ivo’s project was aerodynamic testing of his model, in a wind tunnel. How did we achieve this? Well it wasn’t a real wind tunnel, just a digital simulation thanks to a new online service created by AirShaper.com. A special offer of €500 simulation time (using their digital wind tunnel costs less than a real one!) was created just for us at STANCE, and you simply have to follow this link and sign up to their newsletter (it’ll cost you your email address) and they could pick you to receive the €500! This offer is only for STANCE followers, and your chances are VERY high!

Ivo can explain his project topic himself:

Ivo Mukkulainen

 

Jaguar SVO Project 9 – Future Classic

The subject is a classic car of the future.

I want to show how driver’s passion can continue in the future, considering future technology and standards.

New possibility to drive on the race track and not to be scared about consequences.

How Jaguar heritage and design DNA will continue in the future.

Heidi Yli-Suvanto

 

The North Face Exploration Vehicle

 

This graduation project is a conceptual exploration vehicle that is branded for The North Face and is suitable for both urban and natural environments. A major goal of this project is to encourage peo­ple who have spent most of their lives in the city to explore and feel comfortable going to areas outside of the urban environment. The inspiration, and overarching goal of this project, is to facilitate eye-opening experiences in nature and inspire people to take better care of their surroundings.

 

Mika Niskavaara

 

KTM 360 Electric Motorcycle Concept

 

My graduation project is an electric motorcycle concept for freeriding and exploring urban environments. With this concept l’m going to explore solutions and possibilities for urban freeriding. l’m aiming to introduce new ideas to the motorcycle industry inspired by bmx and freestyle mountain biking.

 

Mikke Leinonen

 

Nissan Kirei – Future Classic

 

My final project is the future classic vehicle concept. The car is designed for the year 2025 and vehicle should win the Concours d’Elegance competition in 2050.

The main focus of the project concentrates on the exterior design of the vehicle.The car should stand out from the mass and awaken great emotions.The car has to be futuristic and there should be elements that make it a classic in the future. I have chosen Nissan for the brand, because I’m not so familiar with Nissan. I also wanted to choose a brand that does not have a classic car so far. The purpose of my project is to be a Vanguard for the Nissan and help the brand to create a classic car in the future.

I’ve tried to find elements and issues for the project that make products classic and iconic. The written part of the thesis consists of the steps of the project’s progress, brand history and Concours d’Elegance competition.

 

Peppi-Emilia Salmi

 

Trimoto – Endurance Motorcycle Trailer

 

The thesis focuses on designing a motorcycle transport trailer. With the market research, I strive to create a potential and useful concept for the market.

The result should be an affordable, lightweight and functional entity for fluctuations a Finnish weather conditions. The trailer should be able to carry two or three full size enduro motorcycles and their drivers’ accessories.

The thesis is perceived with a 3D model made by the Autodesk Fusion 360 modeling program and the physical 1:6 model.

Perttu Susi

 

Hukka Houseboat

 

In my Bachelor’s Thesis I have designed a houseboat for private use. It is suitable for year-round living in Finland’s varied weather conditions. The houseboat strives to solve the challenges of urban living in the future. Urbanization and rising sea levels resulting from climate change can affect the emergence of new forms of living in Finland as well as in the rest of the world. The houseboat I have designed is environmentally friendly and it is also suitable for going at the high seas.

 

Tatu Konttinen

 

Vator 27DC – Reviving a Finnish Boat Brand

 

The subject of this thesis is a study and a concept of reviving Vator boats with a new model and development of a businessmodel. Vator is a dead brand which used to be one of the biggest boat companies in Finland.

The procecution of the idea required research about contemporary boating and how it should evolve in the future.

The idea of owning things is changing and since boating is concidered as an expencive hobby there is no doubt that it wont affect the boating culture aswell. Major part of the process is to focus on customer needs and demands in the near future without forgetting a boat that suits multiple purposes.

Teemu Paavola

 

Mega Yacht Concept for 2040

 

This thesis is about future possibilities of yachting and new younger generation users.

Focus on this thesis is on future technologies and younger users. What is possible in the future and what do the younger generation want from their yachts. A fictional user has been created for this thesis to get more realistic end result. User is based on a future research. The design of this yacht came from the futures pos­sibilities and functions that user needs. There is no companies or any other contractors.

Thesis is fully based on a research and fictional user needs. Design is created based on research and sketching all the way to the final 3d model.

 

 

Click the image to go sign up!

 

SaveSave

Categories
degree show news

STANCE17

2017 marks our third ever graduation year, and our graduates displayed wide-ranging vehicle proposals based on their own independent research and collaboration with industry clients. We still like to use our unofficial name and brand STANCE here at Finland’s first and only full-time Vehicle Design study programme. This year we wanted to emphasise that we are from Lahti (not Helsinki!) and that we are based in the small but world famous Lahti Institute of Design. Lahti is something of a motor-city in Finland, with a strong automotive culture. There’s also a bus factory based here. That particular place was part of a project to design and build Saunabussi (yes, a bus with a sauna inside) which two of our students were involved with. We were very grateful to have Saunabussi visiting our STANCE17 event! Interestingly, the first franchise of London’s Ace Corner Cafe is right here in Lahti Finland. We teamed up with Ace Corner Finland to host our degree show. Ace Corner is also the location for Finland’s largest motorcycle museum. Our event gave VIP visitors access to the motorcycle museum for free- and we thank the owners of Ace Cafe for that privilege. On the evening of 24th we presented our STANCE award, sponsored by our good friends at Rightware (one of Finland’s top vehicle industry partners). The award for best project this year, was given to Ilja Oikarinen for his innovative plastic concept vehicle. The Pod-Vehicle concept is an autonomous vehicle that owners can sleep inside- and can be owned, or even rented like a Japanese pod-hotel – for mega-city workers to sleep near their place of work. Other commendable projects included Waltter Holm’s Patria armoured vehicle concept. A very comprehensive and detailed design project, with the most accurate and detailed model we have ever seen at our institute. Two students, Antti Vahtola and Antti Alasalmi, returned just in time from Turin Italy, where they had been working at the Changan Automotive Europe design studio. They completed the Chagan Serenity visual identity concept thesis work at that studio. This type of collaboration with industry is a vital part of our learning process and we are incredibly grateful to Changan Automotive for all their help. We would like to thank Patria, Covestro, Lada Moscow, Changan Automotive, Rightware and of course Ace Corner for all their help contributing to this years successful projects and exhibition.

Mikael Kosonen

 

Police Multi Terrain Vehicle

The subject of this graduation project is to create a concept for a new kind of police vehicle for finding missing people in off-road environments. This thesis examines missing person search operations and associated problems and tries to find answers to these questions. At this moment a searching process is usually too complicated and public authorities don`t have any vehicles made for this use. Also the resources are limited, because effective search operations need so many people to join them.

Police Multi-Terrain Vehicle

Henri Helvilä

 

ORCA

This graduation project is about designing a marine rescue vehicle. I try to find the issues surrounding current rescue vehicles and concentrated on finding solutions to the problems that complicate the operations of the current rescue boats. The final product is purely conceptual vehicle and also my vision of the ideal small marine rescue vehicle. The vehicle is operated by one person, and it’s capable of transporting another person along with the driver.

ORCA Marine Rescue Vehicle

 

Joonas Peitsara

 

Militia Phantom

This thesis and the visual aspect of the project focused on the walking combat vehicles of Titanfall. These vehicles are called Titans.

The goal of this project was to design a new type of Titan for the Frontier Militia unit that is in the science-fiction universe of Titanfall.

The design process of this project includes a wide range of fine detailed digital and traditional drawings.

The end result is a super heavy stealth camouflaged assault and ambush Titan, Phantom

Teppo Antolla

 

Sampo from Kalevala

My thesis project was to focus on the world of Kalevala and bring the mythical machine named Sampo into today’s world in the form of a motorcycle. For those who don’t know, Sampo is a magical device of indeterminate form. It has been proposed to be knowledge, power, skill as well as material things, such as a magical mill, a counterfeit device, and a machine for minting coins.

My aim was to build a rugged machine, visiting the past and picking up key elements from days gone by. My project features a hardtail frame to make it low and to keep a retro feel to it. For example, Harley-Davidson fat boy wheels are used, because they give an impression of historic style, when wheels were riveted by blacksmiths. In Kalevala, Blacksmith Ilmarinen forged the Sampo.

Sampo Motocycle

Waltter Holm

 

ARCTOS

The aim of the bachelor’s thesis was to design an innovative armoured personnel carrier. This bachelor’s thesis is made in cooperation with Patria Land Systems. An armoured personnel carrier is an armoured vehicle which run on tracks, in which the crew can be transported. My Bachelor’s thesis presents a novel solution to armoured personnel carriers which can easily be adapted to other purposes. Purpose is possible by switching the integrated function module into the another function module. Function module options may include the evacuation, reconnaissance, maintenance and in-service module. Armoured personnel carrier is completely unarmed.

ARCTOS

Hilja Kaitila

 

Algorithms as designers

The topic of this graduation project is to create a design process that benefits from computing science by using algorithms and artificial intelligence as part of the process. The focus is on how designers can exploit existing programs that have a large volume of users (big data) and how research results can be applied to Lada’s renewed brand image.

Antti Vahtola and Antti Alasalmi

 

Changan Serenity

This graduation project was created for Chinese car manufacturer Changan. The brief was to create a visual identity for the brand and to form the key elements of their design. Our mission was to build a vision which presents Changan’s identity, giving the guidelines for the global design language. Our concept is built around safety and clarity. Changan means “lasting safety” as a name, so the story for the vehicle reflects the brand. The main theme of the concept was the interaction with water, having strong inspiration from a boating world combined with a Scandinavian touch. The vehicle is designed for the autonomous era. The user experience will be highlighted when there’s no need to drive.

Ilja Oikarinen

 

Pod-car Concept

My graduation project was created with the collaboration of Covestro, a company that produces plastics. This project is aimed at finding a way to merchandise Covestro’s materials in a new and exciting way. To do that I have chosen a future scenario which will address the issue of high density of people and unavailability of housing.

To solve these problems, I have created a vehicle interior concept which will provocatively highlight a solution and proposal for the year 2030. In this concept the interior is used like a Swiss army knife. It is multipurpose, where you can sleep, rest, hang out or drive the vehicle, depending on your need. The car can be rented or bought.

http://www.ace-corner-finland.fi
http://www.moottoripyoramuseo.fi

Categories
degree show events projects

STANCE17 public vote

24th of May 2017 saw the opening of our STANCE 17 degree show. We would like all of you to take part in choosing a “people’s favourite” from our exhibits. So here are all 8 projects that were on display. Take a look through the images, then use the comments to vote. Or head to our Facebook page, or twitter!

Categories
degree show events

STANCE15 – behind the scenes

June 2016, our second ever Vehicle Design graduation show will arrive.  STANCE16 will follow a similar format to STANCE15, with a public exhibition on June 2nd, following a VIP invitation only night on June 1st. We try to invite all of you who contribute to the automotive and vehicle design business here in Finland and across the world. Apologies in advance if we leave you out- let us know as our contact list needs to expand! First we have to prepare though, and even more importantly our students must complete their STANCE 2015 Public Exhibitionstudies by creating a final thesis and design project. This year we will have a diverse range of projects and vehicles (no spoilers, unless they have aerodynamic function!) and we hope they will prove interesting to any visitors and our followers. 2015 gained us some great press coverage, for which we are very thankful. We bring you this blog post, to show what went into the show preparations last year and to showcase some of the projects once again. Please watch this space for news of this years show, and check your inboxes for those VIP invites!

Last year, students produced a couple of traditional 1:4 scale clay/hard models, another 3D digitally printed vehicle at 1:8 scale, and impressive digitally realised designs. Here is some information from our 2015 graduates.

Graduation works

STANCE 2015 Crawler Pekka Puhakka
Crawler Batmobile on the streets of Gotham

Pekka Puhakka / Crawler – Batmobile

The goal of my graduation project is to study Batman as a hero and the phenomenon and history behind the character. Based on my background studies my aim is to design my own visual concept of the legendary hero-car called Batmobile. The end result will be a written graduation project, finished 3Dmodel and renderings of the model in an environment that is representing Gotham City. After the final seminar the aim is to produce 3D-printed plastic scale-model car to be used in all the possible presentations that are going to be held later on. The work represents my own vision of Batmobile. It has nothing to do with DC-Comics that owns all the copyrights to Batman and Batmobile. This is a student project and it will not going to be used in any kind of commercial purposes in future.

Pekka is now working for Wärtsilä. 

STANCE 2015 HUSKY Viljami Raisanen
HUSKY Hybrid Rescue Vehicle landing/take off

Viljami Räisänen / Husky Hybrid Rescue Vehicle

This is the graduation project of Vehicle Design course made in Lahti Institute of design (Lahti University of Applied Sciences) The subject of the project is a futuristic vision of a “search & rescue” vehicle for arctic regions operating both on land and in the air. In this project one concentrates on search and rescue work in certain areas, rescue methods used in arctic conditions and technology that is used in rescue vehicles operating on snowy conditions. The character of the project is meant to be a conceptual vision of future needs of search & rescue vehicle in arctic regions for a year 2035.

Viljami is now studying Transport Design Masters program at Umea University.

STANCE 2015 Olli Seppala
Michelin Challenge 2015 entry – sketches and design process.

Olli Seppälä / Michelin Challenge

The topic of this graduation project is a competition work to an international automotive design challenge named Michelin Challenge. The Challenge has been organized almost every year and this time the brief is to design a people’s car for an already defined or self-defined market sector. I designed an electric or hybrid powered car and its market sector is South-Asia. In this project I have studied the conditions, roads, traffic and culture that affects the final design. I made a study of old car icons which have reached the people’s car-title in their own time. My concept is meant to be a very light weight and environmental friendly car and in its design process I have focused on the manufacturing. This car’s structure is 3d printed and the manufacturing is meant to happen locally close to the consumers. In this thesis I focused mostly to the car’s basic appearance, exterior and functionality but I designed also the interior to the car. This project includes a 3d-model, clay model and hard model.

Olli is currently teaching at LAMK and working freelance.

STANCE 2015 Porsche 881 Kalle Keituri
Porsche 881exterior design sketch

Kalle Keituri / Porsche 881

Chemistry and nature offer a lot of sustainable solutions to be used. Inspired by reactioms, forms and adaptability of advanced sciences, a conceptional idea for my graduation project was formed. By exploring the history of different car brands, Porsche was fullfilling the needs of my concept perfectly. My aim was to create a connection between Porsche design philosophy and chemistry. The concept idea is to make a bold and pure interpretation of a future Porsche sports car. My project concentrates on exterior design. Together with chemistry inspired innovative technological, material and aerodynamic solutions, the aim is to give Porsche design language another expression. The main focus in this project is the design process from early ideation sketches to an 1:4 sized scale model of the exterior and by this to develop my skills as a designer.

STANCE 2015 PURE Driving Antti Laukkanen
PURE Driving interior design sketch

Antti Laukkanen / Pure Driving

Pure driving is a design study of an autonomous car interior. As it is a study of design, it is also a study of the core idea of driving and driving experience. My concept PURE differs from classic autonomous car interiors as my goal was to cherish the very original purpose of driving. Autonomous car interior concepts are almost without exception closer to normal livingrooms than what we consider automotive interiors. So in my research I focused on finding out what makes a good driving experience and how can I maintain the best possible experience, when we get rid off the steering wheel as it is essential in a contemporary car. I needed to find out what other senses and factors are activated in good driving experience. This concept is made for public use so it should show that it is accessible for wide range of users.

My research incldues the history and evolution of the car industry, its technical solutions from materials to powersources and also a new possibilities that autonomous cars bring along themselves. However, I didn’t want to go too deep in to technical solutions and manufacturability, but concentrate on materials and possible experiences and scenarios.

Big part of the research was the future and user research method, that I used to get ideas what is pure driving and which objects are essential inside the car. With this method I also wanted to show a new approach into future research and show that maybe we have to change our way of thinking about future users.

My first intention was not to brand my product for any brand but as I was doing my research I realized that it fits well in to values of Google. Google also launched their autonomous car concept little while ago so I thought that I have a good chance to show my own perspective of Google’s autonmous car interior.

The final product is presented in 2D renderings and pictures. In my design process I used also physical and computer model mockups as a design tool.

Antti is now studying Transport Design Masters program at Umea University.

STANCE 2015 TOBI Sami Kallamaki
Fully realised CAD model of TOBI

Sami Kallamäki / TOBI –electric assisted trekkind bike concept

Topic of this thesis is electric assisted trekking bike concept. Design target is aesthetic trekking bike for longer distances using todays technology and tomorrows innovations. Design drivers are credibility and clearness.

Sami is still to decide on his next adventure… contact us if you would like to make him an offer!

I would now like to share these exclusive images, which were not released to the press. These are rough images from behind the scenes during the 6 months of 2015 leading to our show. Images from our workshops, our design classrooms and finally setting up and running of our public exhibition in conjunction with the entire Lahti Design Institute in 2015.

Another gallery is needed to show the actual VIP event, and also the public exhibition. Most of these images were published by other news blogs at the time, but now we add some of our own packing up images. We had no idea we would be back at the same place 2016!

Categories
degree show news press

STANCE 15 – Vehicle Design Degree Show

On the evening of June 1st 2015, we welcomed a small number of selected VIP guests, to our exclusive designers preview night for Lahti Institute of Design’s Vehicle Design graduation works in Helsinki Finland. The Finnish car design community was well represented, along with our students and graduates. We made a special effort to thank the movers and the shakers, the people that have worked hard for more than 10 years to lay the foundations for our current Vehicle Design course. Our event was part of a larger Institute of Design exhibition, which we also took part in on the following day at Kattilahalli, an ex-power station hall in Finland’s capital, Helsinki.
2015-06-02 10.05.55

2015 is our inaugural graduation year, and after four years studying and practising professional vehicle design, we were very proud to present our group of pioneering graduates. They displayed wide-ranging design proposals based on their own independent research. More images of their projects will follow this blog post very soon.